Robin SmartView Manual page 15

We assume here that the network supports DHCP ('Dynamic Host Configuration Protocol'); if so, all
settings such as the IP addresses, netmask, gateway and DNS are automatically populated.
DHCP is a standard setting in the Robin SV. This option will suffice in 99% of all cases. However,
on occasions the network may not support DHCP . If so, the network details must be set manually.
If the Robin SV isn't activated yet during login, you will receive a notification to activate the Robin
SV.
Follow the activation instructions or reload the webpage to continue the configuration.
5.2 Configuration of the Robin SV.
The configuration program for the Robin SV features 5 sections; 'Telephony', 'Audio', 'Video',
'Network' and 'System'.
 'Telephony'
In the 'Telephony' section, you configure all of the settings that are required for the
communication part of the Robin SV.
 'Audio'
In the 'Audio' section, you can make various modifications to the sound and sound
processing features of the Robin SV, such as loudspeaker volume, microphone sensitivity and
echo suppression.
 'Video'
In the 'Video' section, you can modify the image quality, view the live video image and set
the areas of the image to which the camera must react.
 'Network'
In the 'Network' section, you can view and change the network configuration settings for the
Robin SV.
 'System'
In the 'System' section, you can view and change the settings that influence standard
operation of the Robin SV.
This is also where you can find the 'log files' that make problem-solving easier.
! Note: In the Robin SV software you'll note 'APPLY SETTINGS' buttons. With these buttons you
confirm and activate all the changed settings. !
gf14
Manual Robin SV ENG - v. 1.6
14