Back Panel - Ganz PixelPro ZS1-4DS Installation Manual

PixelPro GXi Series ZS1-4DS Installation Guide

3.2. Back Panel

○
○ ○
7
5
6
○
○
9
8
⑤ DI/DO
The encoder supports four DI and four DO. Refer to the section "4.1.Connectors" for more
specific information.
⑥ Audio In/Out
The encoder has four channels mono audio input and one mixed output. As the output power
for the audio is low, an amplifier speaker is needed.
⑦ RS-485
RS-485 terminal block is used for PTZ controls.
⑧ LAN connector
Use the RJ45 LAN connector for 10/100 Base-T Ethernet.
⑨ Power connector
Connect the power adaptor for power supply.
09-2014-A 7