Connections; Connectors - Ganz PixelPro ZS1-4DS Installation Manual

PixelPro GXi Series ZS1-4DS Installation Guide

4. CONNECTIONS

4.1.Connectors

Video connection
Connect the camera to the video input connectors on the back panel using 75 ohm video
coaxial cables with a BNC connector. Each of the connected video input channel can be looped
to other equipments (e.g. CRT monitor) through external video output connector.
Audio connection
Connect to the audio input device such as a microphone.
Aout
Speaker
Ain
Mic
Sensor Input (D/I)
There are two sensor interface types – Voltage Type and Relay Type. The interface type can be
controlled by the software. Before connecting sensors, check driving voltage and output signal
type of the sensor. Since the connection is different according to sensor type, be careful to
connect the sensor.
09-2014-A 8