Reset; Factory Default - Ganz PixelPro ZS1-4DS Installation Manual

PixelPro GXi Series

5.3. Reset

1. While the device is in use, press the Reset button.
2. Wait for the system to reboot.

5.4. Factory Default

1. Press reset button and hold.
2. Release the Reset button after 5 seconds until LED blinks.
3. Wait for the system to reboot.
The factory default settings can be inferred as follows:
IP address:
Network mask:
Gateway:
User ID:
Password:
09-2014-A
192.168.xx.yy
255.255.0.0
192.168.0.1
root
pass
ZS1-4DS Installation Guide
16