Dual Handle Console Control Features And Operation - Mercury 200 OptiMax DTS Manual

Dual Handle Console Control Features and
Operation
1. Operation of shift and throttle is controlled by the movement
of the control handle. Push the control handle forward from
neutral to the first detent for forward gear. Continue pushing
forward to increase speed. Pull the control handle back from
neutral to the first detent for reverse gear. Continue pulling
back to increase speed.
2. Trim switch (if equipped) ‑ Pressing the trim switch allows
the engine to trim up or down.
3. Control handle tension adjustment screw ‑ This screw can
be adjusted to increase or decrease the tension on the
control handle (cover must be removed). This will help
prevent unwanted motion of the handle in rough water. Turn
the screw clockwise to increase tension and
counterclockwise to decrease tension. Adjust to the desired
tension.
eng
FEATURES AND CONTROLS
F
N
R
3417
5269
65