Stopping The Engine - Mercury 200 OptiMax DTS Manual

DTS CONSOLE MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine
speed is at idle. Do not shift outboard into forward or reverse
when the engine is not running.
• The outboard has three gear shift positions to provide
operation: Forward (F), Neutral (N), and Reverse (R).
• When shifting, always stop at neutral position and allow the
engine speed to return to idle.
• Advance the control lever to further increase speed.

Stopping the Engine

IMPORTANT: Turning key to the "START" position while the
engine is running will result in engine shut down, while leaving
the DTS system active. This will allow the use of the power trim/
tilt from the remote control handle.
Reduce engine speed and shift outboard to neutral position. Turn
ignition key to "OFF" position.
eng
OPERATION
N
F
107
R
3417
3482