Filling Engine Mounted Oil Reservoir Tank - Mercury 200 OptiMax DTS Manual

IMPORTANT: Always make sure the oil tank caps are threaded
on tight. An air leak will prevent oil flow to the engine.

Filling Engine Mounted Oil Reservoir Tank

NOTE: Filling this tank is only necessary if the oil level should
ever drop and the low oil warning system is activated.
1. Remove the top cowl.
2. Loosen the fill cap on the engine oil reservoir tank. Run the
engine until all the air has been vented out of the oil
reservoir tank and tank is filled with oil to the point of
overflow.
3. Retighten the fill cap. Stop the engine and replace the top
cowl.
FUEL AND OIL
2723
52
29424
eng