Inspection And Maintenance Schedule - Mercury 200 OptiMax DTS Manual

EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and
engine specifications directly related to emissions, is placed on
the engine at the time of manufacture.
a
b
c
d
e
a - Idle speed
b - Engine horsepower
c - Piston displacement
d - Engine power ‑ kilowatts
e - Date of manufacture
f - Family number
g - Regulated emission limit for the engine family
h - Regulated emission limit for the engine family
i - Recommended spark plug and gap
j - Percent of fuel line permeation
OWNER RESPONSIBILITY
The owner/operator is required to have routine engine
maintenance performed to maintain emission levels within
prescribed certification standards.
The owner/operator is not to modify the engine in any manner
that would alter the horsepower or allow emission levels to
exceed their predetermined factory specifications.

Inspection and Maintenance Schedule

BEFORE EACH USE
• Check that lanyard stop switch stops the engine.
• Visually inspect the fuel system for deterioration or leaks.
eng
MAINTENANCE
THIS ENGINE CONFORMS TO
EMISSION REGULATIONS FOR SPARK IGNITION MARINE ENGINES
REFER TO OWNERS MANUAL FOR REQUIRED MAINTENANCE,
SPECIFICATIONS, AND ADJUSTMENTS
IDLE SPEED (in gear):
hp hp
kw
SPARK PLUG:
LOW PERM/HIGH PERM:
EMISSION CONTROL
INFORMATION
CALIFORNIA AND U.S. EPA
FAMILY:
L L
HC+NOx:FEL: HC+NOx:FEL:
CO FEL:
GAP:
109
f
g
h
g/kWh g/kWh
i
g/kWh g/kWh
j
43210