Nortel 5500 series Installation Manual page 37

Label
Pwr
Status
Copyright © 2005 - 2006, Nortel Networks
.
Checking LEDs on the Nortel Ethernet Routing Switch 5500 Series 37
Color / Status
Green / steady
Green / blinking
Amber / slow
blinking
Amber / fast
blinking
Off
Green / steady
Green / blinking
Amber / steady
Amber / blinking
Off
Nortel Ethernet Routing Switch 5500 Series
Installation
NN47200-300 2.00 Standard
5.0 7 July 2006
Description
The switch is connected to AC power and is
receiving power.
Problem with primary Boot image. Booted
from back up image. Configuration and agent
code may be incorrect.
System will reset in less than 3 seconds. To
stop the reset, release UI push button.
System will reset in less than 1 second. To
stop the reset, release UI push button.
The switch is not connected to an AC power
source or the power supply unit is not supplying
power.
• During Initialization: The power-on
self-test is complete and the switch is
operating normally.
• After Initialization: The front panel
configuration mode is inactive. Unit booted
successfully.
•
During Initialization: A non-fatal error
occurred during the self-test.
•
After Initialization: The user pushed the
UI button and activated the front panel
configuration mode and the system is
awaiting input.
•
During Initialization: N/A
•
After Initialization: The front panel has
accepted the user command. The system
accepts the UI input and is awaiting
execution.
•
During Initialization: N/A
•
After Initialization: The system has rejected
the UI input.
The switch failed the self-test.
Nortel Networks Confidential