Mounting The Optional Cover - Zhone SkyZhone 1600 Hardware Installation Manual

Mounting the Optional Cover:

maximum coverage. A flat surface measuring 24 inches high and 36 inches wide will be
needed to mount the unit securely.
1. Find a flat surface that is at least 24 inches tall and 36 inches wide.
2. Drill the holes in the wall to align with the corresponding holes in the mounting bracket. See
Figure 13.
3. Obtain the proper screws (not included) to anchor the wall mount assembly to the type of
surface it is being mounted to.
4. Place the mounting bracket on the rear panel of the cover, lining up the mounting holes.
5. Fasten the mounting bracket in the desired location with the appropriate type of screw. Use
the outside holes displayed in Figure 14. These should line up with the holes in the cover.
Figure 12: Contents of wall mount enclosure kit (from left: the lid, the front
cover, the bracket and the base)
Note:
The mounting of the SkyZhone unit should be as high as possible to ensure
SkyZhone 1600, 1400, 1200 Hardware Installation Guide
35