Ethernet Data And Power Cable (Early Version) - Zhone SkyZhone 1600 Hardware Installation Manual

Ethernet Data and Power Cable (Early Version)

Current Ethernet Data and Power cables ship with an RJ45 connector. The RJ connector has the
appropriate number of wires to make a Data only cable or a data and power cable. These cables
follow the EIA/TIA 568B standard. However, early versions of the cable shipped with a blunt end,
requiring the user to add the RJ connector. In addition, the early version of the cable used a
different color code for the wires. The table below summarizes the differences.
Note:
Before crimping a new RJ connector on the cable, double check the part number in order to
verify the color codes of the wire used in the cable.
Table 10: Ethernet (plus Aux Pwr) External Cable with Blunt End
P Signal
i
n
A TX_P
B TX_N
C RX_P
D RX_N
E No Connection
F 48V
F
G Return_48V
G
H No Connection
SkyZhone 1600, 1400, 1200 Hardware Install Guide
24
Wire color (Early Version)
Part number: UTS6JC1210PX1035
Part number: UTS6JC1210PX10330
Blue
White/Blue
Orange
White/Orange
Green
White/Green
Wire color (Current Version)
Part number: UTS6JC1210PX103A5
Part number: UTS6JC1210PX103A30
Part number: UTS6JC1210PX103A10
Part number: UTS6JC1210PX103B5
Part number: UTS6JC1210PX103B30
Part number: UTS6JC1210PX103B10
White/Orange
Orange
White/Green
Green
Blue
White/Blue
White/Brown
Brown