Zhone SkyZhone 1600 Hardware Installation Manual page 36

6. Attach the mounting bracket and the base to the wall (Figure 14). (The base has an UP
arrow cut into the plastic casing to ensure in proper orientation.) Use a 1/4 inch drill masonry
bit to install a 1 inch plastic insert to secure the cover and the aluminum frame to the
concrete wall with the appropriate screws.
7. Attach the protective cover to the base and then attach the base to the (concrete) wall. Note
that the cover should be attached so that the top contains the two cutouts for the angled
antennas.
SkyZhone 1600, 1400, 1200 Hardware Install Guide
36
Figure 13: Mounting Bracket with screw locations
Figure 14: Bracket and Base