Mounting The Skyzhone To A Pole - Zhone SkyZhone 1600 Hardware Installation Manual

Mounting the SkyZhone to a Pole

This section describes the steps to mount a pole for the SkyZhone access point. First select a
mounting location. You can attach the SkyZhone access point to any pipe or pole.
1. Attach screw clamp bands to the pole mounting plate by threading them through the slots on
the mounting plate. The slots are for either horizontal or vertical mounting on large or small
diameter poles. Choose the one most appropriate for this installation.
2. Secure the screw clamp bands around the pole, using a large slotted screwdriver.
SkyZhone 1600, 1400, 1200 Hardware Install Guide
30
Figure 7: Threading screw clamp bands through mounting plate slots