Wall-Mounting Enclosure Kit; Wall-Mount Kit (Without Plastic Cover); Customer Supplied Equipment; Chapter 3 Installing The Skyzhone Access Point - Zhone SkyZhone 1624 Hardware Installation Manual

Installing the SkyZhone access point

Wall-mounting enclosure kit

Wall-mount kit (without plastic cover)

Customer supplied equipment

28
SkyZhone 1624, 1424, 1224 Hardware Installation Guide
•
1 driver bit for the tamper-resistant screws
The SkyZhone access point wall-mounting enclosure kit (920-07811-01)
contains the following items:
•
One wall bracket
•
One paintable decorative cover
•
4 (four) tamper-resistant mounting screws to mount the unit to the bracket
•
6 (six) mounting screws for the decorative cover
•
1 driver bit for the tamper-resistant screws
•
Not included: 4 screws that will go through the metal bracket, plastic
cover and into your wall's surface.
The SkyZhone access point wall-mount kit (without plastic cover)
(SkyZhone-1224 Wi-Fi Access Point) contains the following items:
•
One wall bracket
•
4 (four) tamper-resistant screws
•
1 driver bit for the tamper-resistant screws
For installation, you need the following items:
•
Band tensioner (BAND-IT Tool C001) with cutter
Examples of tensioners are:
Pok-It II Tool (CJ020)
Ratchet Tool (C400
Bantam Tool (C075)
Bantam Strapping Tool (C085)
Heavy Duty BAND-IT Tool (C003)
Thriftool (J075)
Giant Tool (G402)
•
7/16-inch nut driver