Wall-Mounting Enclosure Kit; Wall-Mount Kit (Without Plastic Cover); Customer Supplied Equipment - Zhone SkyZhone 1604 Hardware Installation Manual

Wall-mounting enclosure kit

The SkyZhone access point wall-mounting enclosure kit (920-07811-01) contains the
following items:
•
•
•
•
•
•

Wall-mount kit (without plastic cover)

The SkyZhone access point wall-mount kit (without plastic cover) contains the
following items:
•
•
•

Customer supplied equipment

For installation, you need the following items:
•
•
•
28
SkyZhone 1604, 1404, 1204 Hardware Install Guide
One wall bracket
One paintable decorative cover
4 (four) tamper-resistant mounting screws to mount the unit to the bracket
6 (six) mounting screws for the decorative cover
1 driver bit for the tamper-resistant screws
Not included: 4 screws that will go through the metal bracket, plastic cover and
into your wall's surface.
One wall bracket
4 (four) tamper-resistant screws
1 driver bit for the tamper-resistant screws
Large slotted screw driver to secure the banding clamps
7/16-inch nut driver
Cordless screwdriver with a 2 1/2 " extension to be able to secure the tamper-
resistant screws, or a screwdriver that can receive a tamper-resistant screw that
is at least three inches long.