3.2
Assembly
3.2.1
Replacing the sealing element
Removing the sealing element
Inserting the sealing element
3.2.2
Shortening the pipes
Easytop Inox slanted seat valve (free flow valve) with SC-Contur
Do not use pointed or sharp-edged objects to remove the
sealing element. These could damage the sealing element or
bead.
Remove the sealing element from the bead.
Insert a new, undamaged sealing element into the bead.
Ensure that the complete sealing element is in the bead.
NOTICE!
Leaky press connections due to damaged material!
Press connections can become leaky due to damaged
pipes or sealing elements.
Observe the following instructions to avoid damage to pipes
and sealing elements:
– Do not use cutting discs (angle grinders) or flame cutters
when cutting to length.
– Do not use grease or oils (e. g. cutting oil).
For information about tools, also see
tools" on page 16.
Ä Chapter 3.1.3 „Required
Handling
17 from 20