Bosch Rexroth IndraDrive Mi Project Planning Manual page 73

Project Planning Manual | Rexroth IndraDrive Mi
Identification of Hybrid Cables
Terminal Connector
● 2 × RKH0200 (KSM X3.1 → KSM X3.1)
● 1 × RKH0201 (KSM X3.2 → KSM X3.2)
● 1 × RKH0101 (KSM X3.2 → KSM X3.2)
● 1 × RKH0204 (KSM X3.2 → RKH0700)
● 1 × RKH0700 (flexible cable track)
● 1 × RKH0600 (RKH0700 → KSM X3.1)
● 1 × RHS0004
RHS0004: Each string of distributed servo drives KSM must be terminated with
the terminal connector RHS0004.
All hybrid cables are suited for use in flexible cable tracks. The
"Notes on Electrical Project Planning" on page 99
the maximum allowed length in the flexible cable track.
Hybrid cables are marked according to the following example:
RKH0100/030,5
The cable designation is made up of:
Cable number ⇒ e.g. RKH0100
and
Cable length ⇒ e.g. 30.5 m
Each string of distributed servo drives KSM must be terminated with the termi‐
nal connector.
Terminal connector
Fig.5-31: Order code of terminal connector
Electric Drives | Bosch Rexroth AG
and Controls
Technical Data of the Components
describes how to determine
KSM X3.1 / X3.2
RHS0004
65/152
chapter 7.2