Bosch Rexroth IndraDrive Mi Project Planning Manual page 19

Project Planning Manual | Rexroth IndraDrive Mi
Abbrev. column 24
Abbrev. column 26 27
Abbrev. column 29 30
Abbrev. column 32 33
Abbrev. column 35 36
Abbrev. column 38 39
Distributed servo drives KSM can be optionally supplied with electrically re‐
leased holding brakes.
Option Holding brakes
0 Without holding brake
2 With holding brake
Fig.1-10: KSM holding brakes
The holding brake is not suited for personal protection or as service
brake! Observe the installation and safety instructions for the motor
holding brakes!
● Master communication
SE: SERCOS (RS422)
● Safety option (X41)
NN: None
● Connecting voltage
D7: DC 750 V
● Other design
NN: None
● Firmware
FW: Firmware must be ordered as separate subposition
● Standard reference
The item "Standard reference" refers to standards cited in the type code (e.g.
DIN, EN, ISO ...) or reference INN... factory standards. The type code lists the
edition valid at the point of time the type code is issued.
Electric Drives | Bosch Rexroth AG
and Controls
System Presentation
For holding torques, see individual data
sheets.
11/152