Bosch Rexroth IndraDrive Mi Project Planning Manual page 38

30/152 Bosch Rexroth AG | Electric Drives
General Specifications of the Components
and Controls
Description
Listing according to UL
standard (UL)
Listing according to CSA
standard
UL files (UL)
Fig.4-4: Applied standards
UL ratings
For using the component in the scope of CSA / UL, take the UL
ratings of the individual components into account.
See documentation of the respective component.
In the scope of CSA / UL, it is exclusively the following components
which have been approved to supply the IndraDrive components
HMS, HMD, KCU, KSM:
● HMV01.1E
● HMV01.1R
● HMV02.1R
● HCS02.1E
● HCS03.1E
Make sure that the indicated short circuit current rating SCCR is not
exceeded, e.g. by appropriate fuses in the mains supply of the sup‐
ply unit.
Wiring material UL
In the scope of CSA / UL, use copper 60/75 °C only; class 1 or
equivalent only.
Allowed pollution degree
Comply with the allowed pollution degree of the components (see
chapter "Ambient and Operating Conditions").
UL file number
The components are listed by UL ("Underwriters Laboratories
Inc.®"). You can find the evidence of certification on the internet
under http://www.ul.com
number or the "Company Name: Rexroth".
File numbers of the IndraDrive components:
● E134201
● E227957
The control sections are part of the listed components.
Rexroth IndraDrive Mi | Project Planning Manual
Standard
UL 508 C
Canadian National Standard C22.2 No. 14-05
Company Name:
BOSCH REXROTH ELECTRIC DRIVES & CON‐
TROLS GMBH
Category Name:
Power Conversion Equipment
under "Certifications" by entering the file