D Operating Instructions; D1. Replacing The Needle - Garudan GF-1130-4412 MH User Manual

D1. REPLACING THE NEEDLE

Turn off the main power switch. Replace the needle only when the sewing machine is off.
For 1-needle machine GF-1130:
For 2-needle machine GF-2230:
When changing the needle size, you must adjust the distance of the hook to the needles,
otherwise it will lead to malfunctioning:
Using the smaller size of the needle:
- Skipping the stitches
- Damaging the thread
Using the larger size of the needle:
- Damaging of the tip of the hook
- Damaging the needle
MP04800EN,MP04900EN_200204

D OPERATING INSTRUCTIONS

Turn the hand wheel to rise the needle bar 1 to the
highest position.
Loosen the screw 2.
Pull out the needle from the needle bar 1
downwards.
Insert new needle into the opening in the needle
bar 1 all the way up with the groove 3 to the right.
Tighten the screw 2.
Turn the hand wheel (CCW) to rise the needle bar
1 to the highest position.
Loosen the screw 3.
Pull out the needle from the needle holder 2
downwards.
Insert new needle into the opening in the needle
holder 2 all the way up with the groove of the
right needle 4 to the right and the groove of the
left needle to the left (as shown).
Tighten the screw 3.
GF-1130-4412,GF-2230-4412 MH
© ANITA
10