Chapter 3. Complete Your Installation - IBM e Server i Series Setting Up

Chapter 3. Complete your installation

Perform the following steps to complete your installation:
__ 1. Make sure that you have reinstalled all of the covers on the following system components:
__ a. System unit.
__ b. All system expansion units.
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the
system or the products that attach to the system. It is the customer's responsibility to ensure that
the outlet is correctly wired and grounded to prevent an electrical shock. (RSFTD201)
Note: The fans may start, and system reference codes will appear when you plug the power cord for
your system unit. These actions are normal. They do not indicate that your system unit is
performing an initial program load (IPL).
__ 2. Plug the power cords for the following system components into electrical outlets:
__ a. Your system unit.
__ b. All expansion units attached to the system.
__ c. The system unit console.
__ d. The system printer.
__ 3. Turn power on to each of the following system components by using the associated power-on
button:
__ a. The system printer (if present).
__ b. The system control console.
__ 4. Look at the Function/Data display on the control panel. See Appendix C, "System unit control
panel," on page 49 if you need information about your control panel.
__ 5. If your system unit is an Model 270, 800, or 810, go to step 7.
__ 6. If your system unit is an Model 820, 825, 830, 840, 870 or 890, go to step 8 on page 20.
__ 7. Does 01 B M V=S appear in the Function/Data display?
__ Yes: Go to step 9 on page 20.
__ No: Do the following:
__ a. Press the Increment/Decrement push button until 02 appears in the Function/Data
display.
__ b. Press the Enter push button on the control panel.
__ c. Press the Increment/Decrement push button until B appears in the Function/Data
display.
__ d. Press the Enter push button on the control panel.
__ e. Press the Increment/Decrement push button until M appears in the Function/Data
display.
__ f. Press the Enter push button on the control panel.
__ g. Press the Increment/Decrement push button until S appears in the Function/Data
display.
__ h. Press the Enter push button on the control panel.
__ i. Press the Increment/Decrement push button until 01 appears in the Function/Data
display.
© Copyright IBM Corp. 2002, 2004
19