__ j. Press the Enter push button on the control panel.
01 B M S should appear in the Function/Data display. If it does not, repeat steps 7a
on page 19 through 7j.
__ k. Go to step 9.
__ 8. Does 01 B V=S appear in the Function/Data display?
Note: If you are using Operations Console remote control panel, it may be necessary to click
Enter to verify IPL speed.
Yes
No
Do the following:
↓
__ a. Press the Mode Select button until the Manual indicator (a small hand) lights up.
__ b. Press the Increment/Decrement push button until 02 appears in the Function/Data
display.
__ c. Press the Enter push button on the control panel.
__ d. Press the Increment/Decrement push button until B appears in the Function/Data
display.
__ e. Press the Enter push button on the control panel.
__ f. Press the Increment/Decrement push button until S appears in the Function/Data
display
__ g. Press the Mode Select button until the Normal indicator (OK) lights up.
__ h. Press the Increment/Decrement push button until 01 appears in the Function/Data
display.
__ i. Press the Enter push button on the control panel.
01 B S should appear in the Function/Data display. If it does not, repeat steps 8a
through 8h.
__ j. Go to step 9.
__ 9. Power on your system unit by pushing the white power-on button.
Note: The time needed to do a complete IPL varies depending on the model and configuration.
__ 10. Sign on your system unit. Ensure that you have service tools authority.
__ 11. Go to Chapter 4, "Verify your new configuration," on page 21.
20
Setting up your 0588, 0595, 5088, 5094, 5095 or 5294 Expansion Unit V5R3