Connect Your Unit With Spcn Cables - IBM e Server i Series Setting Up

Connect your unit with SPCN cables

If you encounter difficulties during the procedure, contact your authorized dealer or service provider.
__ 1. Locate available connectors on your unit. See Appendix B, "Connector locations," on page 37.
__ 2. Label and connect the cables to your unit.
__ a. Find the SPCN cable and power cable that was shipped with your expansion unit.
__ b. Connect the cable to connector J15 on your system unit.
__ c. Connect the other end of the cable to connector J15 on your first expansion unit.
Chapter 2. Set up your expansion unit
15