Casio QG-100 Operation, Service Manual & Parts List page 25

Turn on QV Digital Camera and wait for an image to appear on its monitor screen. Next, turn on
3
QG-100 power.
Make sure you connect to a QV Digital Camera before turning on power.
ON key
Turns on power.
POWER indicator
Green: power on*
Red: error
Orange: Lit during printing,
flashes during data
communication
SHIFT indicator
On: SHIFT key pressed
Flashing: multi-image printing
SHIFT key
– key
Scrolls QV Digital Camera
images backward.
* The POWER indicator flashes orange for a few seconds while the QG-100 checks the digital camera's
status.
The following describe key operations in combination with SHIFT. The operations listed below are
performed when the SHIFT indicator is lit.
• SHIFT +: Performs the same function as the QV Digital Camera's MODE button (switches be-
tween multi-image and single-image display).
• SHIFT –: Performs the same function as the QV Digital Camera's DISP button (displays page
number).
• SHIFT PRINT: Cuts tape.
• SHIFT SHIFT: Second SHIFT operation cancels first operation.
• SHIFT MINI LABEL: MINI LABEL operation cancels SHIFT operation.
Perform the following steps whenever the QG-100 does not operate properly.
1. Turn off the QG-100.
2. Wait until the monitor screen of the digital camera changes from blue to a recorded image.
3. Turn of the digital camera.
4. Turn the digital camera back on, and wait until a recorded image appears on its monitor screen.
5. After an image appears, turn on the QG-100.
The digital camera power may not turn off when you operate its POWER switch if the camera is not
connected correctly to the QG-100 or if you perform an improper operation while they are con-
nected. If this happens, use one of the procedures described below
OFF key
Turns off power.
PRINT key
Starts print operation.
Adjusts contrast.
— 23 —
MINI LABEL key
Switches between normal
printing and multi-image printing
(SHIFT indicator is flashing
during multi-image printing).
+ key
Scrolls QV Digital
Camera images
forward.
.
5