TP-Link JetStream TL-SL3452 Reference Manual page 90

nqiikpi"hkng"hncuj"
Fguetkrvkqp"
The nqiikpi"hkng"hncuj command is used to configure the level and the status of
the log file input. To disable the logging file flash funtion, please use pq nqiikpi"
hkng"hncuj"command. The log file indicates the flash sector for saving system log.
The information in the log file will not be lost after the switch is restarted and can
be got by the ujqy"nqiikpi"hncuj"command."
U{pvcz"
nqiikpi"hkng"hncuj"level
pq"nqiikpi"hkng"hncuj"
Rctcogvgt"
level —— Severity level of the log information output to each channel.
are 8 severity levels marked with values 0-7. The smaller value has the higher
priority. Only the log with the same or smaller severity level value will be output.
By default, it is 4 indicating that the log information marked with 0~4 will be
saved in the log buffer.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the log file function and set the severity as 7:
VN/UN564:*eqphki+%nqiikpi"hkng"hncuj"7"
engct"nqiikpi"
Fguetkrvkqp"
The"engct nqiikpi command is used to clear the information in the log buffer
and log file.
U{pvcz"
engct nqiikpi"[ buffer | flash ]"
VN/UN564:1VN/UN5674
78
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
"
There