TP-Link JetStream TL-SL3452 Reference Manual page 180

urcppkpi/vtgg"jqnf/eqwpv"value
pq"urcppkpi/vtgg"jqnf/eqwpv
Rctcogvgt"
value —— The maximum number of BPDU packets transmitted per Hello Time
interval, ranging from 1 to 20 in pps. By default, it is 5.
Eqoocpf"Oqfg"
Global Configuration Mode"
Gzcorng"
Configure the hold-count of STP as 8pps:"
VN/UN564:*eqphki+%urcppkpi/vtgg"jqnf/eqwpv 8
urcppkpi/vtgg"ocz/jqru"
Fguetkrvkqp"
The urcppkpi/vtgg" ocz/jqru command is used to configure the maximum
number of hops that occur in a specific region before the BPDU is discarded. To
return to the default configurations, please use pq" urcppkpi/vtgg" ocz/jqru"
command.
U{pvcz"
urcppkpi/vtgg"ocz/jqru"value
pq"urcppkpi/vtgg"ocz/jqru
Rctcogvgt"
value —— The maximum number of hops that occur in a specific region before
the BPDU is discarded, ranging from 1 to 40 in hop. By default, it is 20.
Eqoocpf"Oqfg"
Global Configuration Mode"
Gzcorng"
Configure the max-hops of STP as 30:"
VN/UN564:*eqphki+%urcppkpi/vtgg"ocz/jqru 30
VN/UN564:1VN/UN5674
168
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg