TP-Link JetStream TL-SL3452 Reference Manual page 220

hop-value —— NTDP Hops, which is the hop count the switch topology collects.
NTDP Hops ranges from 1 to 16. By default, it is 3.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable NTDP function globally, and specify NTDP Hops as 5, NTDP Interval
Time as 30 minutes:
VN/UN564:*eqphki+%enwuvgt"pvfr" "
VN/UN564:*eqphki+%enwuvgt"pvfr"vkogt"kpvgtxcn/vkogt"30
VN/UN564:*eqphki+%enwuvgt"pvfr"jqr"5"
enwuvgt"gzrnqtg"
Fguetkrvkqp"
The enwuvgt" gzrnqtg command is used to enable the topology information
collecting function manually.
U{pvcz"
enwuvgt"gzrnqtg"
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the topology information collecting function manually:
VN/UN564:*eqphki+%enwuvgt"gzrnqtg
enwuvgt"
Fguetkrvkqp"
The enwuvgt command is used to configure cluster functions of a specified port.
To return to the default configuration, please use pq"enwuvgt command.
U{pvcz"
enwuvgt"[pfr { disable | enable }] [pvfr { disable | enable }]
pq"enwuvgt"
Rctcogvgt"
ndp —— Enable/ Disable NDP function for the port. By default, it is enabled.
VN/UN564:1VN/UN5674
208
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg