Gzcorng"
Specify the interval-time as 50 seconds:
VN/UN564:*eqphki+%nqqrdcem/fgvgevkqp"kpvgtxcn 50"
nqqrdcem/fgvgevkqp"tgeqxgt{/vkog"
Fguetkrvkqp"
The nqqrdcem/fgvgevkqp" tgeqxgt{/vkog command is used to configure the
time after which the blocked port would automatically recover to normal status.
U{pvcz"
nqqrdcem/fgvgevkqp"tgeqxgt{/vkog"recovery-time"
Rctcogvgt"
recovery-time —— The time after which the blocked port would automatically
recover to normal status, and the loopback detection would restart. It is integral
times of detection interval, ranging from 3 to 100 and the default value is 3.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the recovery-time as 3 times of detection interval:
VN/UN564:*eqphki+%nqqrdcem/fgvgevkqp"tgeqxgt{/vkog 3"
nqqrdcem/fgvgevkqp*kpvgthceg+"
Fguetkrvkqp"
The nqqrdcem/fgvgevkqp command is used to enable the loopback detection
function of the specified port. To disable it, please use pq"nqqrdcem/fgvgevkqp
command.
U{pvcz"
nqqrdcem/fgvgevkqp" "
pq"nqqrdcem/fgvgevkqp"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
VN/UN564:1VN/UN5674
140
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
Need help?
Do you have a question about the JetStream TL-SL3452 and is the answer not in the manual?