triggered either the sampled value exceeds the Rising Threshold or is under the
Falling Threshold . By default, the Alarm Type is all.
owner-name —— The owner of the entry, ranging from 1 to 16 characters. By
default, it is monitor.
interval —— The alarm interval time, ranging from 10 to 3600 in seconds. By
default, it is 1800.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the ports of entries of 1-3 as Gi1/0/2, the owners as owner1 and the
alarm intervals as 100 seconds:
VN/UN564:*eqphki+%toqp" cncto 1-3" kpvgthceg" fastEthernet 1/0/2 qypgt
owner1 kpvgtxcn"100
ujqy"upor/ugtxgt"
Fguetkrvkqp"
The ujqy" upor/ugtxgt command is used to display SNMP configuration
globally.
U{pvcz"
ujqy"upor/ugtxgt"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display SNMP configuration globally:
VN/UN564:%ujqy"upor/ugtxgt
ujqy"upor/ugtxgt"xkgy"
Fguetkrvkqp"
The ujqy"upor/ugtxgt"xkgy command is used to display the View table.
U{pvcz"
ujqy"upor/ugtxgt"xkgy"
VN/UN564:1VN/UN5674
201
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
Need help?
Do you have a question about the JetStream TL-SL3452 and is the answer not in the manual?