TP-Link JetStream TL-SL3452 Reference Manual page 223

ujqy"enwuvgt"pvfr"
Fguetkrvkqp"
The ujqy" enwuvgt" pvfr command is used to display NTDP configuration
information.
U{pvcz"
ujqy" enwuvgt" pvfr" [" kpvgthceg" [hcuvGvjgtpgv" port | ikicdkvGvjgtpgv port ] |
fgxkeg/nkuv"]
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number. By default, the configuration of
all Fast / Gigabit Ethernet ports is displayed.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the global information of NTDP:
VN/UN564:%ujqy"enwuvgt"pvfr"
Display the NTDP configuration of all Ethernet ports:
VN/UN564:%ujqy"enwuvgt"pvfr"kpvgthceg
Display the device table of NTDP:
VN/UN564:%ujqy"enwuvgt"pvfr"fgxkeg/nkuv"
ujqy"enwuvgt" "
Fguetkrvkqp"
When the current switch is Commander Switch, the ujqy"enwuvgt"command is
used to display the global configuration of Cluster.
U{pvcz"
ujqy"enwuvgt"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the global configuration of Cluster:
VN/UN564:%ujqy"enwuvgt" "
VN/UN564:1VN/UN5674
211
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg