TP-Link JetStream TL-SL3452 Reference Manual page 208

ipaddr-change —— Enable ipaddr-change trap. It is sent when IP address is
changed such as user manually modifies the IP address or the switch obtains a
new IP address from DHCP.
loopback-detection —— Enable loopback-detection trap. It is sent when the
switch detects loopback or loopback is cleared.
storm-control —— Enable storm-control trap. It is sent when the multicast or
broadcast rate exceeds the predefined value.
spanning-tree —— Enable spanning-tree trap. It is sent when the port forwarding
status changes or the port receives TCN packet or packet with TC flag.
memory —— Enable memory trap. It is sent when CPU usage exceeds 80%.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable SNMP extended bandwidth-control trap for the switch:
VN/UN564:*eqphki+%"upor/ugtxgt"vtcru"bandwidth-control"
upor/ugtxgt"vtcru"oce"
Fguetkrvkqp"
The upor/ugtxgt" vtcru" oce" command is used to enable SNMP extended
MAC
learn-mode-change and max-learned. To disable the sending of SNMP
extended MAC address related traps, please use pq"upor/ugtxgt"vtcru"oce"
command.
U{pvcz"
upor/ugtxgt"vtcru"oce"[ new | full | learn-mode-change | max-learned ]
pq"upor/ugtxgt"vtcru"oce [ new | full | learn-mode-change | max-learned ]
Rctcogvgt"
new —— Enable new MAC address trap. It is sent when the switch learns new
MAC address including dynamic address, static address and filter address.
full —— Enable MAC address table trap. It is sent when the MAC address table
is full.
learn-mode-change —— Enable MAC address learn-mode-change trap. It is
sent when MAC address learning mode of the switch changes.
VN/UN564:1VN/UN5674
address-related traps
196
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
which include four types: new, full,