Fully Automatic Convoclean Oven Cleaning Workflow - Convotherm 4 easyDial Operating Instructions Manual

6 Cleaning with easyDial
6.7 Fully Automatic ConvoClean Oven Cleaning Workflow
Prerequisites
The unit door must be closed.
■
A fully automatic ConvoClean oven cleaning profile must have been selected.
■
The cleaning profile must have been started.
■
Cleaning process
The user removes all food
1
Before the fully automatic ConvoClean oven clean‐
ing process starts, all food needs to be removed
from the oven cavity. The C-Dial will light up with a
solid green light.
The unit prompts the user to open the unit door
An acoustic signal asking for the food to be re‐
moved from the unit will be emitted and the 'Open
unit door' prompt indicator will light up at the same
time.
Food taken out
2
While the user checks to make sure that all food
has been removed, the 'Close unit door' indicator
will light up. The C-Dial will light up with a solid yel‐
low light.
Clean
3
After the unit door is closed, the fully automatic
ConvoClean oven cleaning process will start. The
display will show the remaining cleaning duration.
The C-Dial will light up with a solid yellow light.
The cleaning process ends
4
Once the end of the cleaning process is reached,
the C-Dial will start flashing with a green light.
The unit prompts the user to open the unit door
An acoustic signal asking for the food to be re‐
moved from the unit will be emitted and the 'Open
unit door' prompt indicator will light up at the same
time.
49