Workflow For Oven Cleaning Without Cleaning Agent - Convotherm 4 easyDial Operating Instructions Manual

6 Cleaning with easyDial
6.6 Workflow for Oven Cleaning Without Cleaning Agent
Prerequisites
The unit door must be closed.
■
The 'oven cleaning without cleaning agent' cleaning profile must have been selected.
■
The cleaning profile must have been started.
■
Cleaning process
The user removes all food
1
Before the 'Oven cleaning without cleaning agent'
process starts, all food needs to be removed from
the oven cavity. The C-Dial will light up with a solid
green light.
The unit prompts the user to open the unit door
An acoustic signal asking for the food to be re‐
moved from the unit will be emitted and the 'Open
unit door' prompt indicator will light up at the same
time.
Food taken out
2
While the user checks to make sure that all food
has been removed, the 'Close unit door' indicator
will light up. The C-Dial will light up with a solid yel‐
low light.
Clean
3
After the unit door is closed, the 'oven cleaning
without cleaning agent' process will start. The dis‐
play will show the remaining cleaning duration. The
C-Dial will light up with a solid yellow light.
The cleaning process ends
4
Once the end of the cleaning process is reached,
the C-Dial will start flashing with a green light.
The unit prompts the user to open the unit door
An acoustic signal asking for the food to be re‐
moved from the unit will be emitted and the 'Open
unit door' prompt indicator will light up at the same
time.
48