Cooking Workflow For A Multi-Step Cooking Profile - Convotherm 4 easyDial Operating Instructions Manual

5 Using the Cookbook
5.7 Cooking Workflow for a Multi-Step Cooking Profile
Prerequisites
You must have opened a multi-step cooking profile from the 'Cookbook'.
■
You must have pre-heated or cooled down the oven cavity after being prompted to do so.
■
You must have already placed the food you want inside the oven cavity.
■
Cooking workflow
Starting
1
After the unit door is closed, the C-Dial will light up
with a solid green light. Pressing the C-Dial will
start the cooking sequence.
Cooking step 1
2
The cooking sequence will start with cooking step
1. During all cooking steps, the remaining total
cooking time / the internal temperature reached will
be displayed alternately with the current cooking
step. The C-Dial will light up with a solid red light.
Cooking step 2
3
The cooking sequence will continue with cooking
step 2. The C-Dial will light up with a solid red light.
Cooking step 3
4
The cooking sequence will continue with cooking
step 3. The C-Dial will light up with a solid red light.
The cooking process ends
5
Once the end of the cooking sequence is reached,
the C-Dial will start flashing with a green light.
The unit prompts the user to remove the food from
oven
An acoustic signal asking for the food to be re‐
moved from the unit will be emitted and the 'Open
unit door' prompt indicator will light up at the same
time.
41