Cooking Workflow With Cool Down Function - Convotherm 4 easyDial Operating Instructions Manual

4 Cooking with easyDial
4.10 Cooking Workflow with Cool down Function
Prerequisites
You must have entered a new cooking profile or opened one from the 'Cookbook'.
■
The oven cavity temperature must be too high for the selected cooking profile.
■
Cooking workflow
The oven temperature is too high
1
The unit makes the 'Cool down' indicator flash in
order to indicate that the oven cavity should be
manually cooled down. The C-Dial will light up with
a solid green light.
The unit prompts the user to open the unit door
At the same time, the 'Open unit door' indicator will
light up with a solid light so that the unit door can
be opened (in order to allow the unit to cool down
faster).
The unit prompts the user to activate the cool-down
2
function
After the unit door is opened, the 'Cool down' indi‐
cator will continue to flash. The C-Dial will light up
with a solid yellow light.
Cool down
3
After the 'Cool down' button is pressed, the unit au‐
tomatically uses the fan to cool down the oven cav‐
ity to the cooking temperature set in the cooking
profile. During the cool-down process, the C-Dial
will light up with a solid yellow light.
The oven temperature is reached
4
Once the oven temperature is reached, the fan will
stop. The C-Dial will flash with a green light.
Loading
While food is being put inside the oven, the 'Close
unit door' indicator will light up with a solid light.
Starting
5
After the unit door is closed, the C-Dial will light up
with a solid green light. Pressing the C-Dial will
start the cooking sequence.
Cooking
6
The cooking sequence will start. The unit will start
displaying the remaining cooking time or the inter‐
nal temperature reached, as applicable. The C-Dial
will light up with a solid red light.
30