As Required; Change The Air Filter - Fayat Group Bomag BVP 10/36 Operating Instruction, Maintenance Instruction

Forward marching vibratory plate
Hide thumbs Also See for Bomag BVP 10/36:
Table of Contents

Advertisement

6.11

As required

6.11.1

Change the air filter

Fig. 68
NOTICE!
Do not run the engine without an air filter, since this
could cause premature wear of the engine.
The air filter must be changed after several times
cleaning, but at the latest after 1 year.
Contaminants or dirt must not enter into the intake
channel.
Unscrew wing nut (1) Ä Fig. 68 and remove the housing
cover (2).
Clean the housing cover from inside.
Unscrew wing nut (3) and take off paper element (4) with the
foam rubber insert (5).
Check the rubber seal (6), replace if necessary.
NOTICE!
The rubber seal (6) frequently sticks to the paper ele-
ment.
Soak the new foam rubber insert (5) in clean engine oil. Then
squeeze out excess oil.
Pull the foam rubber element (5) over the new paper element
(4).
Insert the air filter correctly and tighten it with the wing nut
(3).
NOTICE!
If the air filter is not correctly inserted, dust and foreign
particles can enter into the air intake channel.
Reassemble the housing cover (2) with the wing nut (1).
BVP 10/36 / BVP 18/45
Maintenance
69

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bomag bvp 18/45

Table of Contents