Fayat Group Bomag BVP 10/36 Operating Instruction, Maintenance Instruction page 53

Visual inspection/cleaning
Fig. 38
Fig. 39
Insert the air filter:
Fig. 40
Separate the foam rubber and paper elements of the air filter
Ä Fig. 38.
Examine both thoroughly for perforations and cracks and
replace if damaged.
WARNING!
Danger of injury!
Always wear protective clothes (goggles, gloves) when
working with compressed air.
Clean the paper insert (4) Ä Fig. 39 carefully by light
banging or blow it carefully out from inside to outside with
dry, clean compressed air (max. 2 bar (29 psi)).
In case of excessive dirt replace the paper element.
Clean the foam rubber insert (5) in warm soapy water, rinse it
and let it dry thoroughly.
Soak the foam insert in clean engine oil. Then squeeze out
excess oil.
NOTICE!
If the air filter is not correctly inserted, dust and foreign
particles can enter into the air intake channel.
Pull the foam rubber element (5) over the paper element (4).
Insert the air filter correctly and tighten it with the wing nut
(3).
Reassemble the housing cover (2) with the wing nut (1).
BVP 10/36 / BVP 18/45
Maintenance
55