Fayat Group Bomag BVP 10/36 Operating Instruction, Maintenance Instruction page 18

Safety regulations
Notes on safety in the operating
and maintenance instructions
Loading/transporting the machine
Starting the machine
18
WARNING!
Paragraphs marked like this highlight possible dangers
for persons.
NOTICE!
Paragraphs marked like this highlight possible dangers
for machines or parts of the machine.
Paragraphs marked like this contain technical informa-
tion for the optimal economical use of the machine.
ENVIRONMENT!
Paragraphs marked like this point out practices for
safe and environmental disposal of fuels and lubricants
as well as replacement parts.
Observe the regulations for the protection of the envi-
ronment.
Make sure that persons are not endangered by the machine tipping
or sliding off.
Use only safe lifting gear of sufficient load bearing capacity Min-
imum lifting capacity of lifting gear: see operating weight in chapter
"Technical Data".
Loads must only be attached and hoisted by an expert (capable
person).
Fasten the lifting gear only at the specified lifting points.
Check lifting eye for damage before use. Do not use a damaged or
in any other way impaired lifting eye.
Do not lift or lower the machine jerkily.
The tension must always be effective in vertical direction.
The machine must not swing about when being lifted.
Do not step or stand under suspended loads.
Always use suitable lashing gear on the lifting points to lash down
the machine.
Lash the machine down, so that it is secured against rolling, sliding
and turning over.
Before starting
Become acquainted with the equipment, the control elements, the
working principle of the machine and the working area.
BVP 10/36 / BVP 18/45