Troubleshooting - Vacmaster VSG2101 Use & Care Manual

Hose Blockage Removal
1. To clean out the hose, press the release button on the wand and separate the
nozzle from the wand.
2. Carefully remove any debris or blockage from the inside of the nozzle neck.
3. Once the blockage is removed, reattach the wand and hand vacuum to the
nozzle. Start the vacuum to confirm air flow through the unit.
Caution: Do not use scissors or other sharp objects to remove a blockage
from the nozzle as these may damage the motorized nozzle.

TROUBLESHOOTING

-18-