General Assembly Instructions - Vacmaster VSG2101 Use & Care Manual

GENERAL ASSEMBLY INSTRUCTIONS

Assembly Instructions
1. Align and insert the top of the wand into the hand vacuum until you hear a
click.
Note: Make sure it fits firmly. To remove the wand, press the wand release
button and separate.
2. Insert the motorized nozzle into the bottom of wand until you hear a click.
3. Mount the wall mounting bracket on the wall. Do not secure the bracket to
drywall only. Secure the screws to a stud. Use the 2 screws provided. Mount
at a recommended height of 59" and no less than 44" above the floor. Ensure
that no plumbing or electrical cables, wires or ductwork are located directly
behind the mounting area.
-8-