Assembly; Operation; Filling The Water Tank; Turning On/Off - Silvercrest SDR 1100 C2 Operation And Safety Notes

Accessory
Function
Angle nozzle 14 For precision cleaning of
items with hard-to-reach areas
(faucets, sinks, etc .) .
Extension Useful for hard-to-reach areas .
15
nozzle
Round brush 16 For scrubbing especially tough
stains . Ideal to use on ceramic
tile, grouting, and other similar
surfaces .
˜ Assembly
(Fig . B)
Accessory

Assembly

Puller
8
Cotton cover
10
Upholstery
9
nozzle
Extension
12
hose
Extension
15
nozzle
Angle nozzle 14
Round brush
16
12 GB
Fit the hooks (at the back
of the puller 8 ) into the
slots of the upholstery
nozzle 9 .
Press the puller 8 against
the upholstery nozzle 9
until locked .
Fix on the upholstery
nozzle 9 .
Attach the intake to
the steam outlet 1 of
the product/extension
hose 12 .
Screw in a clockwise
direction until tight .
Attach the intake to
the steam outlet 1 of
the product, extension
hose 12 or extension
nozzle 15 .
Dismount all the accessories in a reverse order .
NOTE – Dismounting the puller 8 : Unlock the
clip first .
˜ Operation
˜ Filling the water tank
m
DANGER! Risk of electric shock! Before
filling the water tank 2 : Disconnect the power
plug 7 from the mains socket .
m
CAUTION! Fill the water tank 2 with tap water
or distilled water without any additives .
If your tap water is hard: Use distilled water .
If your tap water is moderately hard: Mix distilled
water and tap water (ratio of 1:1) .
NOTES:
As long as there are steam and pressure in
the water tank 2 you cannot open the safety
valve 3 . To open the water tank:
– Release steam or
– wait until the product has cooled down .
Do not exceed the water tank's 2 maximum fill
capacity of 250 ml .
Slowly open the safety valve 3 . Before fully
opening, wait a few seconds until the steam stops
hissing .
Use the measuring cup 13 and the funnel 11 to
fill the water tank 2 through the water inlet 2 .
Close the safety valve 3 .
˜ Turning on/off
Connect the power plug 7 to a suitable mains
socket .
The power indicator 18 lights up . The product
starts to produce steam immediately .
The product is ready to use when the steam
indicator 17 lights up .
Turning off the product: Disconnect the product
from the mains socket .