Before First Use; Assembly; Unfolding/Folding The Handle; Attaching The Steam Foot - Silvercrest SDM 1500 D2 Assembly, Operating And Safety Instructions

Do not operate the product with
wet hands or while standing on a
wet floor . Do not touch the power
plug with wet hands .
Stop using the product if the anti-
kink protection on the power cord
is damaged!
Cleaning and storage
Always turn off the product
before disconnecting it from the
power supply .
Do not pull the power plug out
of the wall socket by the power
cord . Do not wrap the power
cord around the product .
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water .
Store the product in a cool, dry
place, protected from moisture
and out of the reach of children .
Protect the product against heat .
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances .
10 GB/IE/NI
˜ Before first use
Remove all packaging materials . Check if all
parts are complete .
˜ Assembly
˜ Unfolding/folding the handle
Handle
Unfolding Unfold the handle until it clicks in
place .
Folding Press the folding button 25 . Then,
fold the handle downwards .
˜ Attaching the steam foot
Align the locking hole of the steam foot 16 with
the release lever 17 .
Push in the steam foot 16 until it locks in place .
NOTE:
The angle of the steam foot 16 can be adjusted:
Steam foot
Release steam Gently step on the steam foot . Pull
foot the main body backwards .
Lock steam Pull the main body forward until the
foot steam foot locks in place .
Do not force the steam foot 16 onto the main
unit . Always use both hands while connecting the
parts .
Microfiber cloth installation
(for cleaning floors)
Place the microfiber cloth 14 on the steam
foot 16 . Align the hook-and-loop straps of the
microfiber cloth with the hooks on the steam foot .
Carpet glider installation
(for cleaning carpets)
Attach the microfiber cloth 14 . Place the carpet
glider 15 onto the steam foot 16 until it locks in
place .
1
16