Basic Settings Tab - Multicast (Master Settings) - Algo 8186 User Manual

Basic Settings Tab – Multicast (Master Settings)
Note: See (Advanced Settings > Advanced Multicast) section for more information on
populated IP values below:
Multicast Mode (Master/Sender Selected)
If master is enabled the 8186 will broadcast an IP stream when activated in addition to
playing the audio over its own speaker. (Note that the 8186 cannot be both a multicast
Master and Slave simultaneously).
Number of Zones
Select "Basic Zones Only" if configuring nine or fewer multicast zones (shown beside
"Speaker Playback Zones") or select "Basic and Expanded Zones" to configure up to 50
Document 90-00079B
03/24/2020
Page 28
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker FW 1.7
(604) 454-3792
support@algosolutions.com