Basic Settings Tab - Multicast (Slave Settings) - Algo 8198 User Manual

Master Single Zone
The zone that multicast stream will be sent to. If 'DTMF Selectable Zone' is chosen
above, this setting will not apply to Paging, since the zone now must be dynamically
selected per call via DTMF. However, the specified 'Master Single Zone' setting is still
used for any multicast events triggered by the Ring, analog input, or the relay input.
Speaker Playback Zones
Allows Master device to play audio for selected zones only. This is useful if using DTMF
Selectable Zone mode (or More Page Extensions per zone) and wishing to make the
Master unit a member of only certain zones.
Basic Settings Tab – Multicast (Slave Settings)
Multicast Mode (Slave Selected)
If Slave mode is enabled the 8198 will activate when receiving a multicast message. It
will mimic the audio stream, but use local volume settings ('Page Speaker Volume' in
Basic Settings > Features).
Multicast Type - Regular
Select "Regular" if receiving multicast from other Algo SIP endpoint(s) and/or multicast-
enabled phone(s) that use RTP audio packets.
Document 90-00109
2020-09-21
Page 31
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8198 SIP Ceiling Speaker PoE+
(604) 454-3792
support@algosolutions.com