Algo 8186 User Manual page 46

all the configured Authentication Password(s) must be re-entered in the Basic Settings >
SIP tab, and any other locations where SIP extension have been configured, to save the
encrypted password(s).
If the Realm is changed at a later time, all the passwords will also need to be re-entered
again to save the passwords with the new encryption.
To obtain your SIP Realm information, contact your SIP Server administrator (or check the
SIP log file for a registration attempt). The Realms may be the same or different for all the
extensions used.
SNMP Support
Additional SNMP support is anticipated for future, but the 8186 SIP Horn Speaker will
respond to a simple status query for automated supervision. Contact Algo technical
support for more information.
System Integrity Checking
This feature verifies installed system packages to ensure they have not been tampered
with by running 'Perform Check'. Enabling this feature may cause reboots and upgrades
to take 30 seconds longer. Verification results can be found on the Status page.
SA-Announce Support
Syn-Apps' SA-Announce paging application converts unicast streams to multicast and
delivers them to the target endpoints. The feature can only be used on the 8186 when
Multicast Master Mode is disabled (set to 'None') in the Basic Settings > Multicast tab.
SA-Announce Server
Enter the SA-Announce Server to use the Syn-Apps paging feature. To use the server
provided by the DHCP Option 72, leave the field blank.
Local Management Port
Enter the local management port for the SA-Announce Server.
InformaCast Support
This feature requires a valid InformaCast license to be activated. Please contact
sales@algosolutions.com
Document 90-00079B
03/24/2020
Page 46
for assistance.
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker FW 1.7
(604) 454-3792
support@algosolutions.com