Algo 8186 User Manual page 35

Action – Play Tone
When the 8186 input is triggered, a tone or a pre-recorded WAV file will play over the local
speaker, or multicast if enabled. This function can be used to call support/assistance in
service or retail environments, notify about an emergency at a specific location in medical
or educational facilities, or sound an alarm during an intrusion.

Action When Input Triggered:
o Tone/Pre-recorded Announcement
o Tone Duration
Action – Make SIP Voice Call
When the 8186 input is triggered, a voice path will open for an intercom-like call via the
8186 to a pre-configured phone extension. This option can be used when a call needs to
be made from a public place where a phone would not be practical to use.

Action When Input Triggered:
o Extension to Dial
o Call Mode
o Allow 2

Outbound SIP Call Settings:
o Outbound Ring Limit
o Ringback Tone
o Maximum Call Duration
Action – Make SIP Call with Tone
When the 8186 input is triggered, a private call can be generated to a pre-configured
phone extension with a pre-recorded message. For instance, a call to a supervisor's
phone notifying about an emergency or intrusion at some location.

Action When Input Triggered:

Extension to Dial

Allow 2

Tone/Pre-recorded Announcement

Interval Between Tone (seconds)

Maximum Tone Duration

Outbound SIP Call Settings:

Outbound Ring Limit

Ringback Tone
Document 90-00079B
03/24/2020
Page 35
nd Button Press
nd Button Press
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker FW 1.7
(604) 454-3792
support@algosolutions.com