Table of Contents
Advertisement
Note
Web Interface is accessed by entering 8410/8420 IP Address into the web browser.
Important
It is highly recommended to change the default password if the device is directly connected to a public network.
Status
The Status page of the device will be available before and after logging on. This section can be used to check the status
of the 8410 for the following:
•
SIP Registration
•
Call Status
•
Proxy Status
•
Provisioning Status
•
MAC
•
IPv4
•
Date/Time
•
Multicast Mode
•
Volume
•
PoE Detection
•
Relay Input Status
Note
For security purposes, the Status page can be hidden when logged out through the settings under the Advanced
Settings > Admin tab.
These options may change depending on how the device is configured.
5.2
Basic Settings
5.2.1 SIP
The SIP tab allows for the SIP server information and account credentials to be entered. This information can be
obtained from your telephone system administrator or hosted account provider. After entering the information and
saving the settings, go to the Status tab to confirm the registration was successful.
AL061-UG-GP258410-001-R0
8420 IP Dual-Sided Display Speaker
support@algosolutions.com
8410 IP Display Speaker &
Page 22
Advertisement
Table of Contents
