Algo 8186 User Manual page 34

Switch with supervision. Via supervision settings, notification actions can also be triggered
if the input switch is disconnected.
1203 Call Switch
The 1203 Call Switch is a simple contact closure switch with an illuminated
button and supervision capabilities. When used in conjunction with the 8186,
the 1203 can prompt a single action with one-touch, or a continuous action if
the button is held.
Mute Switch
Apply an external switch (short-circuit) across the Relay Input terminals 5 & 6 in order to
mute the speaker. This allows a temporary "disable" switch to control the device if desired,
for example in a boardroom to block paging during important meetings.
Leave the Relay Input terminals open (no-connect) for regular full-volume operation when
in this mode.
1202 Call Button
While the 8186 can be configured to play the WAV file only once, it can also be enabled to
play it continuously with just one touch on the 1202 Call Button. The action can then be
stopped via the smaller oval cancel button located below the main call button on the 1202
Call Button.
1204 Volume Button
The 1204 Volume Control Switch is a simple 2 terminal potentiometer that
will allow attenuation below the max volume level (configured under 'Basic
Settings > Features')
Algo's 1204 can be used for variable volume control. The maximum volume should still be
set in the Basic Settings > Features tab as usual, and then the Volume Control Switch will
allow attenuation below this level. Enabling Priority Multicast Override allows priority
multicast to override the volume set by the Volume Control Switch. Enabling 'Mute On
Lowest Setting' allows audio to be completely muted when volume control switch is turned
all the way down.
Document 90-00079B
03/24/2020
Page 34
The 1202 Call Button is a one-touch button for event notification and
response. It can be used with the 8186 for improved customer service,
emergency notification, and non-emergency alerting. The Call Button's
one-touch button can trigger a single or continuous action, which can be
halted via the small cancel/reset button located below the main call
button.
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
8186 SIP Horn Speaker FW 1.7
(604) 454-3792
support@algosolutions.com