Snow With Dmx; Clean Up - Magicfx SNOWCASE Series User And Installation Manual

3.8

SNOW WITH DMX

1. Make sure that the prescribed safety zone is clear.
2. Activate the DMX safety address. The FX LED indicator on the machine lights up.
3. Choose the desired reach by setting the effect distance anywhere from 0 to 255.
4. Activate the effect by setting the DMX value for the effect density anywhere
between 10 and 255.
5. Vary the effect reach and density during the effect duration, if desired.
6. Enjoy the view!
7. To deactivate, change the DMX value of the effect density to a value below
10, then deactivate the safety adress. The FX LED indicator on each machine
dims.
3.9

CLEAN UP

CAUTION
1
When finished, extract the snow fluid from the hose. To do so, set the value for
safety adress between 201 and 255, or start the Extract Fluid programme via the
display. This function will stop automatically after a certain time.
Walk carefully when approaching the machine. The floor can be
slippery due to spilled snow fluids.
MAGICFX SNOWCASE — User and Installation Manual
®
27