Advertisement
Installation
760mm
29.92"
1"
Decor Star
1. Install hand shower connector and attach
PVC tubing to complete the connection.
2. Mark the positions of the 2 brackets on the
wall and set a side the panel. (NOTE: The
distance between the two brackets should be
760mm or 29.92")
3. Using a drill with a tile bit, drill the hole
slowly into the tile. Do not drill into any pip-
ing or wiring in the wall. Insert the anchors
into the wall. (NOTE: Before installing the
brackets, use a small piece of painters tape
or masking tape over the drill area to prevent
damages to the tile)
7
PL-004-SS Rev. A4 122015
Advertisement
